AcuraWatch™ ADAS Test Drive Check List

acura test drives Jan 21, 2020

IMPORTANT: Always be careful of traffic conditions and safety around the vehicle

                        Your test vehicle may not be equipped with all safety systems

Collision Mitigation Braking System (CMBS):

  • Verify system provides visual, audible and haptic warnings when test vehicle detects a collision when moving forward.

Adaptive Cruise Control (ACC):

  • Verify vehicle acceleration, deceleration and braking changes with vehicle in front.

Adaptive Cruise Control w/ LSF (Low Speed Follow):

  • At speeds below 25 MPH (40 km/h) verify acceleration, deceleration and braking with vehicle in front

Blind Spot Information System (BSI):

  • At speeds above 20 MPH (32 km/h) verify system provides visual, audible and haptic warnings when vehicles appear in rear and adjacent lanes.

Lane Keep Assist System (LKAS):

  • Verify system keeps vehicle within driving lanes and/or...
Continue Reading...

AUDI ADAS Test Drive Checklist

audi adas Jan 21, 2020

IMPORTANT: Always be careful of traffic conditions and safety around the vehicle

                        Your test vehicle may not be equipped with all safety systems

Adaptive Cruise Control with Stop & Go Function:

  • Vehicle speed must be between 0 – 155.34 mph / 0 to 250 km/h.
  • Verify system regulates the speed and the interval to the vehicle ahead by automatically accelerating and braking

Active Lane Assist (ALA): 

  • Vehicle speed must be above around 37.28 mph /60 km/h
  • Verify system helps vehicle steer back into the lane by gently correcting vehicle and steering wheel vibration.

Audi Side Assist (ASA)

  • Verify yellow LED indicator lights up in exterior mirror detects other vehicles in the blind spot WITHOUT turn signal engaged AND indicator becomes brighter and flashes multiple times WITH turn signal engaged!

Park Assist (PA):

  • Verify, when...
Continue Reading...

Subaru ADAS Test Drive Checklist

Uncategorized Jan 08, 2020

IMPORTANT:    Always be careful of traffic conditions and safety around the vehicle

                        Your test vehicle may not be equipped with all safety systems

Pre-Collision Braking System (PCBS)

  • Vehicle speed should be between 7MPH/10 km/h and 100MPH/160 km/h
  • Verify system generates buzzer sound, repeated short beeps and visual indicators when system recognizes an impending collision with a vehicle or obstacle in front
  • Verify Pre-Collision Braking System messages appears in combination meter display
  • First Braking and Secondary Braking: Verify system automatically applies brakes

Adaptive Cruise Control (ACC)

  • Verify ACC indicator appears in combination meter display
  • Vehicle speed should be between 20MPH/30 km/h and 90MPH/145 km/h
  • Test for acceleration, deceleration and braking between vehicle and vehicle in front at variable speeds
  • Verify Lead...
Continue Reading...
1 2 3 4
Close

50% Complete

Two Step

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.