Subaru ADAS Test Drive Checklist

Jan 08, 2020

IMPORTANT:    Always be careful of traffic conditions and safety around the vehicle

                        Your test vehicle may not be equipped with all safety systems

Pre-Collision Braking System (PCBS)

  • Vehicle speed should be between 7MPH/10 km/h and 100MPH/160 km/h
  • Verify system generates buzzer sound, repeated short beeps and visual indicators when system recognizes an impending collision with a vehicle or obstacle in front
  • Verify Pre-Collision Braking System messages appears in combination meter display
  • First Braking and Secondary Braking: Verify system automatically applies brakes

Adaptive Cruise Control (ACC)

  • Verify ACC indicator appears in combination meter display
  • Vehicle speed should be between 20MPH/30 km/h and 90MPH/145 km/h
  • Test for acceleration, deceleration and braking between vehicle and vehicle in front at variable speeds
  • Verify Lead Vehicle Indicator appears in combination meter display
  • Verify ‘Obstacle Detected” warning appears in combination meter display

Lead Vehicle Start Alert (LVSA)

  • Verify system notifies the driver when the vehicle stopped in front starts moving but the driver’s vehicle remains stationary
  • Front vehicle must travel approximately 10FT/3 m while test vehicle remains stationary
  • Verify “Lead Vehicle Start” appears in combination meter display
  • Verify system generates warning buzzer and two-tone beep

Lane Keep Assist (LKA)

  • Vehicle speed should be between 37MPH/60 km/h and 90MPH/145 km/h
  • Verify system notifies the driver when the vehicle stopped in front starts moving but the driver’s vehicle remains stationary
  • Verify LKA indicator appears in combination meter display

Pre-Collision Throttle Management (PCTM)

  • Verify system generates “Obstacle Detected” warning and reduces engine power until he or she applies the brakes to avoid an impact.
  • Verify system generates warning buzzer and several short beeps

Lane Departure Warning (LDW)

  • Vehicle speed should be greater than 37MPH/60 km/h
  • Verify system generates warning buzzer and 3 short beeps
  • Verify “Lane Departure” indicator appears in combination meter display

Lane Sway Warning (LSW)

  • Vehicle speed should be greater than 37MPH/60 km/h
  • Verify system generates warning buzzer and 3 short beeps
  • Verify “Sway Warning” indicator appears in combination meter display
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras sed sapien quam. Sed dapibus est id enim facilisis, at posuere turpis adipiscing. Quisque sit amet dui dui.
Call To Action

Stay connected with news and updates!

Join our mailing list to receive the latest news and updates from our team.
Don't worry, your information will not be shared.

We hate SPAM. We will never sell your information, for any reason.