Volvo ADAS Test Drive Checklist
Mar 19, 2020
IMPORTANT: Always be careful of traffic conditions and safety around the vehicle
Your test vehicle may not be equipped with all safety systems
Blind Spot Information System (BLIS)
- Verify BLIS system setting can be enabled/disabled through the center display
- Vehicle speed must be greater than 6 MPH/10 km/h or more) to operate and vehicles must be approaching test vehicle from rear and side blind spot
- Verify Indicator lamp lights up in appropriate mirror and BLIS warning appears in center display
Adaptive Cruise Control (ACC)
- Verify ACC system setting can be enabled/disabled through steering wheel controls
- Driver’s seatbelt must be buckled
- Vehicle speed must be greater than 9MPH/15 km/h
- Verify vehicle accelerates and decelerates with vehicle ahead
- Verify system presents distance bars in center of speedometer
Distance Warning (DW)
- Vehicle speed must be greater than 20MPH/30 km/h
- Verify system generates visual warning in heads up display when distance between vehicle ahead is too short
City Safety in Cross Traffic
- Vehicle speed must be greater than 3MPH/4 km/h
- Other vehicle must cross in front of test vehicle
- Verify system presents “City Safety was Activated” message
Cross Traffic Alert (CTA)
- Place vehicle in Reverse
- Vehicle speed should be 0-5 MPH/8 km/h or more) for CTA to operate
- Verify CTA system generates an audible sound in the speaker on the side where object is identified
- Verify Icon illuminates in center display
- Verify that icon appears on the Park Assist camera top
Driver Alert Control (DAC)
- Vehicle speed must be greater than 40MPH/65 km/h
- Verify system identifies erratic driving and generates an audible warning plus a coffee cup icon in driver display with a message, “Time for a Break soon?”
Departure Warning (LDW)
- Verify LDW system setting can be enabled/disabled through the vehicle information display.
- Vehicle speed must be between 40 MPH/65 km/h and 125 MPH/ 200 km/h for LDW to operate
- Verify system generates an audible warning and/or steering wheel vibration when vehicle leaves marked lane
Lane Keeping Aid (LKA)
- Verify LDW system setting can be enabled/disabled through the vehicle information display.
- Vehicle speed must be between 40 MPH/65 km/h and 125 MPH/ 200 km/h for LDW to operate
- Verify system generates an audible warning and/or steering wheel vibration when vehicle leaves marked lane
- Verify system steers vehicle back into lane when vehicle leaves marked lane
Park Assist (PA)
- Verify PA system setting can be enabled/disabled through the vehicle information display.
- Verify system generates audible sounds in speakers and graphics in center display when system identifies obstacles
- Reverse sensors should activate approximately 5 FT/1.5 m from obstacle
- Side sensors should activate at speeds below 6MPH/10 km/h and when obstacle is 1FT/.3 m
- Forward sensors should activate approximately 2.5 FT/.8 m from obstacle
Park Assist Camera (PAC)
- Verify PAC can be enabled/disabled through the vehicle information display.
- Verify Lines, Towbar, PAS, CTA and Zoom controls operate
Active Park Assist (APA)
- Verify APS system can be enabled/disabled through the vehicle information display.
- Vehicle speed must be below 20 MPH/ 30 km/h
- Select “Park In” and verify system can identify a parking spot
- Verify system automatically can park vehicle in parallel or perpendicular positions
- Select Parallel or Perpendicular parking options to initiate
Road Sign Information (RSI)
- Verify RSI system can be enabled/disabled through the vehicle information display.
- Verify system provides warning symbol in driver display when posted speed is exceeded
- Verify system provides audible warning when posted speed is exceeded or vehicle approaches “no-entry” entrance
Pilot Assist (PA)
- Verify PA system can be enabled/disabled through the steering wheel controls
- System works best at vehicle speed below 30 MPH/ 50 km/h
- Verify system keeps vehicle in lane AND vehicle accelerates and decelerates with vehicle ahead
- Verify system presents two symbols in vehicle information display
- Verify system presents collision risk warning in Heads Up Display
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras sed sapien quam. Sed dapibus est id enim facilisis, at posuere turpis adipiscing. Quisque sit amet dui dui.
Call To Action
Stay connected with news and updates!
Join our mailing list to receive the latest news and updates from our team.
Don't worry, your information will not be shared.
We hate SPAM. We will never sell your information, for any reason.